Step by Step to run the Asset Tracker Demo on nRF9160DK

This blog is to describe how to setup the asset tracker and run the demo on nRF9160 DK board. I would show how to compile image and connect the nRF Cloud for data communication. Prerequisite You have follow all the steps to setup the development environment. If no, you can refer to https://jimmywongiot.com/2019/12/18/step-by-step-on-nordic-connect-sdk-for-development/ https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/getting_started.html nRF9160 … Continue reading Step by Step to run the Asset Tracker Demo on nRF9160DK

AT Commands on the Nordic nRF9160

This blog is to prepare the most common AT commands on nRF9160 and I will try to show how to use the at_client with link monitor for connecting the network. https://infocenter.nordicsemi.com/topic/ref_at_commands/REF/at_commands/at_version.html Modem firmware versions This document describes AT commands used in all versions of the nRF91 Series modem firmware. The modem firmware versions that support … Continue reading AT Commands on the Nordic nRF9160

Tutorial how to create an application on the nRF9160 DK

This chapter will take you through the steps required for creating an application in NCS for nRF9160. This blog is based on the Nordic Connect SDK v1.2.0 version. It may have need to change on the other versions (later). The propose of this blog is to show the idea how to run such example on NCS. … Continue reading Tutorial how to create an application on the nRF9160 DK

Secure Partition Manager on nRF9160

This blog is to introduce the secure partition manager on Nordic nRF9160. The Secure Partition Manager sample provides a reference use of the System Protection Unit peripheral. This firmware is required to set up the nRF9160 DK so that it can run user applications in the non-secure domain. Overview The sample uses the SPM to … Continue reading Secure Partition Manager on nRF9160

How to Upgrade the Modem Firmware on the Nordic nRF9160

This blog is to introduce the method how to upgrade the modem firmware on nRF9160 DK board. nRF9160 DK The nRF9160 DK is an affordable, pre-certifed single-board development kit for evaluation and development on the nRF9160 SiP for LTE-M, NB-IoT and GPS. It also includes an nRF52840 board controller that for example can be used to build … Continue reading How to Upgrade the Modem Firmware on the Nordic nRF9160

Step By Step on Nordic Connect SDK for Development

I would like to update the procedures on how to set up the environment for nRF9160 software development particular by using the Nordic Connect SDK. This blog is just to introduce how to compile the existing example inside the Nordic Connect SDK. nRF Connect for Desktop First, it is better to install the nRF Connect … Continue reading Step By Step on Nordic Connect SDK for Development

Quick Overview to run sample example on nRF9160 DK board with nRF Cloud

This blog is to provide the guideline how to set up the nRF9160 DK board and connect to the nRF Cloud. It would cover the following topic. Select the modem firmware and programRegister nRF91 DK to the nRF Cloud Running few examples such as Asset Tracker, COAP Client, AT Client. When you get the nRF9160 … Continue reading Quick Overview to run sample example on nRF9160 DK board with nRF Cloud