This blog is to show to use your own custom board instead of original developer board from zephyr. You don't need to use any overlay on the zephyr configuration. For example, if you use the zephyr or Nordic nRF Connect SDK (NCS), you need to check which boards are available by west boards. Basically you… Continue reading Build your customer board on the Zephyr / nRF Connect SDK
Category: LTEM
Step by Step to run the Asset Tracker Demo on nRF9160DK
This blog is to describe how to setup the asset tracker and run the demo on nRF9160 DK board. I would show how to compile image and connect the nRF Cloud for data communication. Prerequisite You have follow all the steps to setup the development environment. If no, you can refer to https://jimmywongiot.com/2019/12/18/step-by-step-on-nordic-connect-sdk-for-development/ https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/getting_started.html nRF9160… Continue reading Step by Step to run the Asset Tracker Demo on nRF9160DK
Tutorial how to create an application on the nRF9160 DK
This chapter will take you through the steps required for creating an application in NCS for nRF9160. This blog is based on the Nordic Connect SDK v1.2.0 version. It may have need to change on the other versions (later). The propose of this blog is to show the idea how to run such example on NCS.… Continue reading Tutorial how to create an application on the nRF9160 DK
How to Upgrade the Modem Firmware on the Nordic nRF9160
This blog is to introduce the method how to upgrade the modem firmware on nRF9160 DK board. nRF9160 DK The nRF9160 DK is an affordable, pre-certifed single-board development kit for evaluation and development on the nRF9160 SiP for LTE-M, NB-IoT and GPS. It also includes an nRF52840 board controller that for example can be used to build… Continue reading How to Upgrade the Modem Firmware on the Nordic nRF9160
